NP3116T Series
1U Rack Mounting
16 3IN1 or RS-485 Serial Server
- Support 16 3IN1 or RS-485 serial ports to 2 10/100Base-T(X) self-adaptive Ethernet interfaces
- Support network modes such as redundant mode, switching mode and dual IP mode to meet the needs of various network environments
- Support multiple operating modes like RealCom, TCP Server, TCP Client, UDP Server, UDP Client, UDP Rang and UDP Multicast
- Support redundant power input, the input range of power is 85~265VAC
- Support -40~75℃ wide operating temperature range
NP3116T series are the serial device servers that can make serial device be equipped with networking capability instantly and centrally manage the scattered serial devices and hosts via network. This series has 2 products, and provides 100M copper ports and 3IN1and RS-485 serial ports. It adopts 1U rack-mounted installation to meet the requirements of different application sites.
Serial server supports multiple network protocols, such as TCP, UDP, TELNET, ARP, ICMP, HTTP, HTTPS, SNMP, SSH, SMTP, SNTP, DNS, BOOTP and DHCP protocol. It also possesses complete management functions, including Access Control, Rapid Configuration, Online Upgrading and so on. Each serial port supports 4 TCP or UDP session connections, and it also supports RealCom, TCP Server, TCP Client, UDP Server, UDP Client, UDP Rang, UDP Multicast operating modes and TELNET, WEB, SSHD access modes. Furthermore, supplied management configuration tool based on Windows platform can guide the user to manage and configure the device, achieving immediate networking of serial device via simple settings. Network management system could bring you great user experience through its friendly interface design and easy and convenient operation.
DIP switch can achieve restore factory defaults of the device. Hardware adopts fanless, low power consumption, wide temperature and voltage design and has passed rigorous industrial standard tests, which can adapt to the industrial scene environment with harsh requirements for EMC. It can be widely used in custom checkpoint system, smart gas station, data center and industrial automation, etc.
| Ethernet | Standard: 10Base-T, 100Base-TX Protocol: TCP, UDP, ARP, HTTP, HTTPS, TELNET, ICMP, SMTP, SNTP, DHCP, DNS Rate: 10/100M Automatic Flow Control, MDI/MDI-X Autotunning Interface form: RJ45 Quantity of interfaces: double network port Duplex mode: full/half duplex mode self-adaption Working mode: Each serial port can simultaneously establish up to 4 TCP/UDP session connections. Support multiple operating modes like RealCom, TCP Server, TCP Client, UDP Server, UDP Client, UDP Rang and UDP Multicast | |||||||||
| Serial Port | Standard: EIA RS-232C, RS-485, RS-422 Quantity of serial ports: 16 3IN1 or RS-485 3IN1 signal: DSR, RTS/R-, GND, TXD/R+, RXD, DCD/T-/D-, CTS, DTR/T+/D+ RS-485 signal: D+, D-, GND Baud rate: 110bps-15200bps (customizable110bps-921600bps) Data bit: 5bit, 6bit, 7bit, 8bit Parity bit: None, Even, Odd, Space, Mark Stop bit: 1bit, 1.5bit, 2bit Interface form: 3IN1 serial port adopts RJ45; RS-485 serial port adopts 6-pin 5.08mm pitch terminal blocks (each serial port occupies 3 pins) Flow control: RTS/CTS, DTR/DSR, XON/XOFF Direction control: RS-485 direction adopts Automatic Data Direction Control (ADDC) Load capacity: RS-485 supports 32 points polling (customizable 256 points) Transmission distance: RS-232, 15m; RS-485/422, 1200m Pull up/down resistance for RS-485: 4.7kΩ | |||||||||
| Console Port | CLI command line management port (RS-232), RJ45 | |||||||||
| Configuration Method | WEB configuration management, TELNET configuration, Windows configuration tool, SSHD configuration | |||||||||
| Management | Free ARP, system log, SNMP, serial port status statistics, system network status | |||||||||
| Routing/Switching | Static routing, single IP mode (dual port redundancy, switching mode), dual IP mode | |||||||||
| Security | User right classification, IP address filtering, MAC address filtering, SNMP/ Mail /System Log alarm, HTTP/HTTPS/SSHD/TELNET access control | |||||||||
| Troubleshooting | Ping, Traceroute, packet capture diagnosis | |||||||||
| Time Management | Time Zone, NTP Client | |||||||||
| Indicator | Power indicator, running indicator, Ethernet port indicator, serial port transmission and receiving data indicator | |||||||||
| Power Supply | 85~265VAC redundant power input, AC power supply socket with switch | |||||||||
| Power Consumption |
| |||||||||
| Working Environment | Operating temperature: -40~75℃ Storage temperature:-40~85℃ Relative humidity: 5%～95%(no condensation) | |||||||||
| Physical Characteristic | Housing: IP30 protection, metal Installation: 1U rack mounting Dimension (W x H x D): 441.6mm×44.6mm×207.9mm (lugs are not included) Weight: 2.6kg | |||||||||
| Industrial Standard | IEC 61000-4-2 (ESD, electrostatic discharge), Level 4 l Air discharge:± 15kV l Contact discharge: ±8kV
IEC 61000-4-4 (EFT, electrical fast transient), Level 4 l Signal: ±2kV
IEC 61000-4-5 (Surge), Level 4 l Power supply: common mode±4kV, differential mode±2kV l Signal: common mode ±4kV, differential mode ±2kV
Shock: IEC 60068-2-27 Free fall: IEC 60068-2-32 Vibration: IEC 60068-2-6 | |||||||||
| Authentication | CE, FCC, RoHS | |||||||||
| Warranty | 3 years |
| Available Models | 100M Copper Port | RS-485 | 3IN1 | Power Supply |
| NP3116T-16D(3IN1)-RJ-2P(85-265VAC) | 2 | － | 16 | 85~265VAC, redundant power supply |
| NP3116T-16DI(RS-485)-TB-2P(85-265VAC) | 2 | 16 | － |