ICPE2300 Series

Standard & Protocol

IEEE 802.3 for 10Base-T

IEEE802.3u for 100Base-TX

IEEE 802.3ab for 1000Base-T

IEEE 802.3z for 1000Base-X

3GPP Rel-15 for 5G NR

3GPP Rel-14 for 4G LTX

3GPP Rel-18 for 3G WCDMA

IEEE802.11b/g/n/a/ac for WLAN

IEEE802.11i for wireless security

IEEE802.11r for fast roaming

IEEE802.3af/at for PoE/PoE+

WAN Mode

Link backup (access to Internet by WAN network or 5G dialing, WAN supports DHCP/static IP/PPPoE dialing);

WiFi & 4G/5G roaming (wireless roaming or access to Internet by 5G dialing)

Cellular Network

3G/4G/5G cellular network, network type 5G NR/LTE FDD/ LTE TDD/ WCDMA/ TD-SCDMA/ CDMA/ EVDO

WLAN

WAP/WAP2 personal/enterprise edition encryption mode, hidden wireless SSID, wireless user isolation, wireless transmission power adjustment, maximum user limit, packet segmentation and RTS threshold, China/US wireless channel, WMM

Management

Mobile network detection, local area network, dynamic domain name, UPnP settings, static DHCP, QoS, log management, device alias, access settings, timed restart, backup and  recovery, firmware upgrade

Security Policy

Wireless user black/white list, wireless user event notice, IP filtering, MAC filtering, URL filtering, keyword filtering, IP address black/white list, port forwarding, port redirection, DMZ settings

VPN Tunnel

GRE, PPTP Client/Server, L2TP Client/Server, IPSec

Multicast

Multicast Translate

Troubleshooting

System Log, Ping Test and Route Tracking

Routing Technique

VRRP, RIP, OSPF, routing list settings

Time Management

NTP Client

Wi-Fi Radio Frequency

802.11B/g/n: 2.412GHz~2.4835GHz

802.11Ac/n/a: 5.18GHz~5.825GHz

RF power output: 20dBm

Modulation methods: DBPSK, DQPSK, CCK, OFDM, 16-QAM, 64-QAM, 256-QAM

Wi-Fi Receiving Sensitivity

802.11n_HT40: -82dBm@MCS0, -64dBm@MCS7

802.11n_HT20: -85dBm@MCS0, -67dBm@MCS7

802.11g/a: -91dBm@6Mbps, -72dBm@54Mbps

802.11b: -93dBm@1Mbps, -87dBm@11Mbps

802.11ac: -84dBm@MCS0, -59dBm@MCS9

Wi-Fi Transmitting Power

802.11n_HT40: 23dBm@MCS0, 20dBm@MCS7

802.11n_HT20: 23dBm@MCS0, 20dBm@MCS7

802.11g/a: 23dBm@6Mbps, 20dBm@54Mbps

802.11b: 23dBm@1Mbps, 20dBm@11Mbps

802.11ac: 23dBm@MCS0, 20dBm@MCS9

5G NR Operating Frequency Band

5G NR: n1/n2/n3/n5/n7/n8/n12/n20/n28/n38/n40/n41/n48/n66/n71/n77/

n78/n79

4G LTE-FDD: B1/B2/B3/B4/B5/B7/B8/B9/B12/B13/B14/B17/B18/B19/

B20/B25/B26/B28/B29/B30/B32/B66/B71

4G LTE-TDD: B34/B38/39/B40/B41/B42/B48

3G WCDMA: B1/B2/B3/B4/B5/B6/B8/B19

5G NR Bandwidth

(downward, upward)

5G SA: DL 2.1Gbps, UL 900Mbps

5G NSA: DL 2.5Gbps, UL 650Mbps

LTE: DL 1Gbps, UL 200Mbps

WCDMA: DL 42Mbps, UL 5.76Mbps

Interface

Gigabit copper port: 3 10/100/1000Base-T(X) self-adaptive RJ45 LAN ports, support automatic flow control,  full/half duplex mode, MDI/MDI-X self-adaption

Gigabit COMBO port: 1 10/100/1000Base-T(X) self-adapting RJ45 port or 1000 Base-X SFP slot, it’s WAN port by default; The copper port supports automatic flow control, full/half duplex, MDI/MDI-X self-adaptation, and support PoE power receiving

Antenna interface: 2 2.4G antenna interfaces, RP-SMA-K(Female)

2 5.8G antenna interfaces, RP-SMA-K(Female)

4 5G Sub-6G antenna interfaces, SMA-K(Female)

Serial port (optional): 2 RS-232 and 2 RS-485/422, with 2*10-pin 3.5mm pitch terminal blocks (serial port occupies 14 pins)

CAN (optional): 2 CAN, with 2*10PIN 3.5mm pitch terminal blocks (CAN occupies 6 pins)

I/O port (optional): 4 DI and 4 DO, with 2*10PIN 3.5mm pitch terminal blocks

USB port: 1 Type-A USB 2.0 Female, this interface is reserved

SIM card slot: 1 Micro SIM card slot and 1 Nano SIM card slot, redundant backup; 1 Micro-SD card Slot for reservation

Console port: CLI command line management port(RS-232), RJ45

Alarm port: 6-pin 5.08mm pitch terminal blocks (2 pins for relay), support 1 relay alarm output, this interface is reserved

Serial Port (optional)

Standard: EIA RS-232C, RS-485, RS-422

Quantity of serial port: 2 RS-232 serial ports, 2 RS-485/422 2IN1 serial ports

RS-232 signal: RXD, TXD, GND

RS-485 signal: D+, D-, GND

RS-422 signal: T+, T-, GND, R+, R-

Baud rate: 110bps-921600bps

Data bit: 5bit, 6bit, 7bit, 8bit

Parity bit: None, Even, Odd, Space, Mark

Stop bit: 1bit, 1.5bit, 2bit

Interface form: adopt 2*10PIN 3.5mm pitch terminal blocks (serial port occupies 14 pins)

Direction control: RS-485 direction adopts Automatic Data Direction Control (ADDC)

Load capacity: RS-485/422 end supports 32-node polling environment

Transmission distance: RS-232, 15m; RS-485/422, 1200m

Work modes: Realcom, TCP Server, TCP Client, UDP Server, UDP Client

CAN (optional)

Standard: CAN2.0A, CAN2.0B

Interface quantity: 2 CAN ports

CAN signal: CANH, CANL

Duplex mode: 2-wire Half Duplex Mode

Baud Rate:5/10/20/50/100/125/250/500/800/1000kbps

Load capacity: support concurrent transmitting of 110 nodes

Transmission distance: 40m~10km

Interface form: 2*10PIN 3.5mm pitch terminal blocks (CAN occupies 6 pins)

Work mode: TCP Server, TCP Client, UDP Server, UDP Client, UDP Rang and UDP Multicast

I/O Port (optional)

Interface quantity: 4 DI input, 4 DO output

Interface form: 2*10PIN 3.5mm pitch terminal blocks (DI channel occupies 10 pins, DO channel occupies 8 pins)

DI:

l Digital filtering: software configuration (1-65535ms)

l Counter frequency: ≤1kHz

l Working mode: DI or counter

l Input type:

- dry contact (ON: GND short circuit; OFF: open circuit)

- wet contact Source(NPN)  (ON: 0~3VDC; OFF: 10~30VDC)  

- wet contact Sink(PNP)  (ON: 10~30VDC; OFF: 0~3VDC)  

DO:

l Pulse frequency: ≤ 500Hz

l Working mode: DO or pulse output

l Output type: Sink (PNP)

l Rated current: 200mA/Channel

l Overcurrent protection: 650mA/Channel

l Overvoltage protection: 45VDC

Power Supply

WAN port: supports PoE power receiving, which conforms to IEEE802.3af/at standard

Power supply terminal: supports 12~48VDC single power and dual power input,  supports input redundancy and nonpolarity, adopting 6-pin 5.08mm pitch terminal block(4-pin power supply)

Indicator

Running indicator, alarm indicator, power indicator, 2.4G indicator, 5.8G indicator, Wireless bridge signal strength indicator, interface indicator, PoE indicator, 5G indicator, 5G bridge signal strength indicator, USB indicator, SD card indicator, SIM card indicator, serial port indicator, CAN port indicator, DI indicator, DO indicator

Power Consumption

ICPE2300A-BW-8A25-1GC3GT-PD2P12_48

l No-load: 6.5W@24VDC

l Full-load: 20.0W@24VDC

Working Environment

Operating temperature: -40~75℃

Storage temperature:-40~85℃

Relative humidity: 5%～95%(no condensation)

Physical Characteristic

Housing: IP40 protection, metal

Installation: DIN-Rail mounting

Dimension (W x H x D): 88mm×150mm×135mm

Weight: 1.68kg (ICPE2300A-BW-8A25-1GC3GT-PD2P12_48)

Industrial Standard

IEC 61000-4-2 (ESD, electrostatic discharge), Level 3

l Air discharge:± 8kV

l Contact discharge: ±6kV

IEC 61000-4-4 (EFT, electrical fast transient pulses), Level 3

l Power supply: ±2kV

l Ethernet port: ±1kV

IEC 61000-4-5 (Surge), Level 3

l Power supply: common mode±2kV, differential mode±1kV

l Ethernet interface: ±2kV

Shock: IEC 60068-2-27

Free fall: IEC 60068-2-32

Vibration: IEC 60068-2-6

MTBF

>250000 hours

Authentication

CE, FCC, RoHS

Warranty

5 years

Available Models

Gigabit

Antenna Interface

Serial Port

CAN

I/O Port

Power Supply

COMBO

RJ45

2.4G

5.8G

5G Sub-6G

RS-232

RS-485/422

DI

DO

ICPE2300A-BW-8A25-

1GC3GT-PD2P12_48

1

3

2

2

4

－

－

－

－

－

12~48VDC

Or PoE power receiving

ICPE2300-2A-1GC3GT-2C4D4IO-2225-2LV

1

3

2

2

4

2

2

2

4

4