ICS5400TSN Series

19-inch 1U Rack Mounting

44-Port Gigabit /10Gigabit Layer 3 TSN Industrial Ethernet Switch

  • Support 24 Gigabit copper ports, 16 Gigabit SFP slots, 4 10Gigabit SFP+ slots
  • Support  Precision Time Protocol (PTP), provide sub-microsecond synchronization accuracy to meet requirements for high-precision time synchronization
  • Support TSN (time sensitive networking) protocol standards such as IEEE802.1AS, IEEE802.1Qbv, IEEE802.1Qbu, IEEE802.1CB, IEEE802.1Qci and IEEE802.1Qcc, which can provide deterministic transmission with low delay and high reliability for data
  • Adopt Ring patented technology, support single ring, coupling ring, chain, Dual-homing, automatic recovery time of network failure < 20ms
  • Support DC or AC dual power redundancy (optional), input voltage: 12~55VDC or 85~264VAC
  • Support -40~75 wide operating temperature range
圆润按钮示例
Overview 

ICS5400TSN-24GT16GS4XS series are 44-port Gigabit/10Gigabit TSN (time sensitive network) switches, and layer 3 industrial Ethernet switches that integrates the characteristics of TSN. Provide Gigabit copper port, Gigabit SFP slot, 10Gigabit SFP+ slot, which can negotiate the port rate and duplex mode with the device at the opposite end through self-negotiation. Support 12~55VDC or 85~264VAC power supply scheme, and adopt rack installation mode, which can meet the requirements of different application sites.

TSN (Time Sensitive Networking) is a set of protocol standards developed by IEEE802.1 TSN task group. This standard defines the time sensitive mechanism of Ethernet data transmission, and ensures the transmission performance of business traffic in Ethernet by allowing some traffic packets to be forwarded first, clearing routes by using gating scheduling mechanism and bandwidth reservation. It adds certainty and reliability to the standard Ethernet to ensure that the Ethernet can provide stable and consistent service levels for the transmission of critical data. Currently, the supported basic TSN protocols include: IEEE 802.1AS, IEEE 802.1Qbv, IEEE 802.1Qbu, IEEE 802.1CB, IEEE 802.1Qci, IEEE 802.1Qcc (Netconf/Yang), etc.

The network management system supports a variety of network protocols and industry standards, such as IPv6, PTP, TSN, RIP, OSPF, PIM, VRRP, ISIS, NAT, Ring, STP/RSTP/MSTP, MRP, ERPS, VLAN, IGMP/MLD, IGMP/MLD Snooping, DHCP Server/Relay, LLDP, LACP, port mirroring. It possesses complete management functions and supports SNMP centralized management, port statistics, storm suppression, network diagnosis, online upgrade, etc. CLI, HTTP, HTTPS, TELNET, SSH, Netconf and other access methods can be supported. Network management system could bring you great user experience through its friendly interface design and easy and convenient operation.

The input power supply is two independent power supply circuits which can ensure the normal operation of the device when one power supply fails. When power supply or port has link failure, ALM indicator will be bright and send out alarm, meanwhile, alarm device connected to the relay will send out alarm for rapid scene troubleshooting. The hardware adopts fanless, low power consumption and wide temperature design, which has passed rigorous industrial standard tests, and suits for the industrial scene environment with harsh requirements for EMC. It can be widely used in railway transportation, smart mining, smart city, new energy, smart grid, intelligent manufacturing smart medical care, petroleum and petrochemical industry and other industrial fields.

Specifications

Standard & Protocol

IEEE 802.3 for 10Base-T

IEEE 802.3u for 100Base-TX

IEEE 802.3ab for 1000Base-T

IEEE 802.3z for 1000Base-X

IEEE 802.3ae for 10GBase-X

IEEE 802.1AS PTP for TSN

IEEE 802.1Qbv

IEEE 802.1Qbu

IEEE 802.1CB

IEEE 802.1Qci

IEEE 802.1Qcc

IEEE 802.3x for Flow Control

IEEE 802.1D for Spanning Tree Protocol

IEEE 802.1w for Rapid Spanning Tree Protocol

IEEE 802.1s for Multiple Spanning Tree Protocol

ITU-T G.8032 for ERPS

IEEE 802.1Q for VLAN

IEEE 802.1AB for LLDP

IEEE 802.3ad for LACP

TSN

PTP, QBU, QBV, Stream, CB, QCI, Netconf+YANG configuration

Management

SNMP v1/v2c/v3 centralized managed equipment, Port Mirroring, LLDP, DHCP Server, DHCP Relay, port speed limit, port isolation, port statistics, file management, online upgrade, log information, Syslog server

Security

User privilege classification, SSH/HTTPS protocol authorization, link flap protection, port loop detection, IPDT, IPv6DT, Smart-Link, NAT, port alarm and power alarm.

Switch Function

802.1Q VLAN, MAC, static aggregation, LACP, ARP, storm suppression

Unicast / Multicast

IGMP-Snooping, MLD-Snooping, IGMP, MLD, PIM-SM, PIM-DM, IPv6-PIM-SM, IPv6-PIM-DM

Redundancy Technology

Ring, MRP, STP/RSTP/MSTP, ERPS

Routing Technique

RIP, RIPng, OSPF, OSPFv3, ISIS, VRRP, IPv6 VRRP, BGP

Troubleshooting

Ping, Traceroute, Network Cable Diagnosis, DDMI

Time Management

NTP Client Configuration, Time Zone Configuration

Interface

Gigabit copper port: 10/100/1000Base-T(X) self-adaption or forced mode, RJ45, Automatic Flow Control, Full/Half Duplex Mode self-adaption, MDI/MDI-X Autotunning

Gigabit SFP Slot: 100/1000Base-X self-adaption or forced mode, SFP slot

10Gigabit SFP+ slot: 1G/2.5G/10G Base-X self-adaption or forced mode, SFP+ slot

Console port: CLI command line management port(RS-232), RJ45

Relay: support 1 relay alarm information output, using 3-pin 5.08mm pitch terminal blocks, and the current load capacity is 1A@30VDC or 0.3A@125VAC

Indicator

Power indicator, running indicator, alarm indicator, interface indicator

Switch Property

Transmission mode: store and forward

MAC address: 32K

Buffer: 32Mbit

Backplane bandwidth: 160G

Switch delay: <10μs

Power supply

ICS5400TSN-24GT16GS4XS-2LV:

Power supply range: 24VDC/48VDC (12~55VDC), dual power supply redundancy

Connection mode: 5-pin 5.08mm pitch terminal blocks

Connection protection: anti-reverse connection

 

ICS5400TSN-24GT16GS4XS-2HV:

Power supply range: 110VAC/220VAC (85~264VAC), dual power supply redundancy

Connection mode: AC socket with switch

Power consumption

ICS5400TSN-24GT16GS4XS-2LV:

No-load: 19.5W@24VDC

Full-load: 47.3W@24VDC

Working Environment

Operating temperature: -40~75

Storage temperature:-40~85

Relative humidity: 5%~95% (no condensation)

Physical Characteristic

Housing: IP40 protection, metal

Installation: 19-inch 1U rack mounting

Dimension (W x H x D): 441.6mm×44.45mm×290mm (lugs are not included)

Industrial Standard

IEC 61000-4-2 (ESD, electrostatic discharge), Level 3

Contact discharge: ±6kV

Air discharge: ±8kV

 

IEC 61000-4-4 (EFT, electrical fast transient pulses), Level 3

Power supply: ±2kV

Copper port: ±2kV

 

IEC 61000-4-5 (Surge), Level 3

Power supply: differential mode±1kV, common mode±2kV

Copper port: ±2kV

 

Shock: IEC 60068-2-27

Free fall: IEC 60068-2-32

Vibration: IEC 60068-2-6

Authentication

CE, FCC, RoHS, IPv6 Ready LoGo, TSN Industry Chain Directory Program Certificate

Warranty

5 years

Models

Available Models

Gigabit Copper Port

Gigabit SFP

10Gigabit SFP+

Power Supply

ICS5400TSN-24GT16GS4XS-2LV

24

16

4

12~55VDC, dual power supply

ICS5400TSN-24GT16GS4XS-2HV

24

16

4

85~264VAC, dual power supply