Серия IAP2300
Монтаж на DIN-рейку
Беспроводная однодиапазонная точка доступа
- Поддержка 1 порта WAN, 4 портов LAN и 2 интерфейсов антенн WIFI и т. д.
- Поддержка четырех режимов работы, включая маршрутизацию, точку доступа, сетевой мост и клиент
- Поддержка резервирования двух источников питания, блок питания имеет защиту от неправильной полярности, входное напряжение: 12~36 В постоянного тока
- Поддержка широкого диапазона рабочих температур от -40 до 75 ℃
IAP2300-2N2-5T-2LVI is industrial wireless AP. This product supports 1 WAN port, 4 LAN ports and 2 antenna interfaces, etc. It adopts DIN-Rail mounting, which can meet the requirements of different application scenes.
The device supports four working modes: routing, AP, bridge and client. Support IEEE802.11b/g/ n wireless technology, wireless transmission rate up to 300Mbps; Support WPA, WPA2, WPA3 and other wireless encryption methods, with SSID hiding, wireless user isolation, MAC address filtering, ARP binding, DMZ settings and other security policies; Support for virtual APS, where a single AP device supports multiple SSIDs.
The input power supply is two independent power supply circuits which can ensure the normal operation of the device when one power supply fails. DIP switch can achieve one-key reboot and factory default recovery. When power supply or port has link failure, ALARM indicator would be bright and send alerts for quick troubleshooting on the scene. This product adopts fanless, low power consumption, wide temperature wide pressure industrial grade design, which can adapt to the harsh environment. It can be widely used in rail transit, security, smart city, integrated pipe gallery, production automation, smart lamp pole and other industries.
| Standard & Protocol | IEEE802.11b/g/n for WLAN IEEE802.11i for wireless security IEEE802.11r for fast roaming IEEE 802.3 for 10BaseT IEEE 802.3u for 100BaseT(X) |
| Working mode | Route mode, AP mode, bridge mode, client mode |
| Network Settings | External Network Settings, Intranet Settings, Wireless Settings, Wireless Probe, AC Management, SNMP Management, QoS Management |
| Network Security | MAC Filtering, IP Filtering, URL Filtering, WPA/WPA2/WPA3 Encryption, DMZ |
| WIFI Transmission Rate | 802.11n: 6.5~300Mbps 802.11b: 11/5.5/2/1Mbps 802.11g: 54/48/36/24/18/12/9/6Mbps |
| WIFI RF | Channel: 2.412GHz~2.4835GHz RF power output: 23dBm Modulation methods: DBPSK, DQPSK, CCK, OFDM, 16-QAM, 64-QAM |
| WIFI Receiving Sensitivity | 802.11n_HT40: -82dBm@MCS0, -64dBm@MCS7 802.11n_HT20: -85dBm@MCS0, -67dBm@MCS7 802.11g: -91dBm@6Mbps, -72dBm@54Mbps 802.11b: -93dBm@1Mbps, -87dBm@11Mbps |
| WIFI Transmission Power | 802.11n_HT40: 23dBm@MCS0, 20dBm@MCS7 802.11n_HT20: 23dBm@MCS0, 20dBm@MCS7 802.11g: 23dBm@6Mbps, 20dBm@54Mbps 802.11b: 23dBm@1Mbps, 23dBm@11Mbps |
| Interface | Copper port: 5 10/100Base-T(X) RJ45 ports, 4 LAN + 1 WAN Antenna interface: 2 WIFI antenna interfaces, RP-SMA-K(Female) |
| Indicator | WLAN port indicator, running indicator, alarm indicator, power supply indicator, LAN port connection indicator |
| Physical Characteristic | Housing: IP30 protection, metal Dimension (W x H x D): 53mm x 138mm x 110 mm(exclude antenna) Installation: DIN-Rail mounting Weight: 557g |
| Working Environment | Operating temperature: -40~75℃ Storage temperature: -40~75℃ Relative humidity: 5%~95% (no condensation) |
| Power Supply | Support dual power supply redundancy, voltage range: 12~36VDC Support non-polarity, built-in overcurrent 2.0 protection |
| Power Consumption | Normal temperature No-load l 1.8W@12VDC l 1.8W@24VDC l 2.0W@36VDC
High temperature full load l 5.8W@12VDC l 5.4W@24VDC l 5.4W@36VDC |
| Industrial Standard | IEC 61000-4-2 (ESD, electrostatic discharge), Level 3 l Air discharge: ±8kV l Contact discharge: ±6kV
IEC 61000-4-4 (EFT, electrical fast transient pulses), Level 3 l Ethernet port: ±1kV l Relay: ±2kV
IEC 61000-4-5 (Surge), Level 3 l Power supply: common mode±2kV, differential mode±1kV l Ethernet port: ±2kV l Relay: common mode ±2kV, differential mode±1kV
Shock: IEC 60068-2-27 Free fall: IEC 60068-2-32 Vibration: IEC 60068-2-6 |
| Authentication | CE, FCC, RoHS |
| Warranty | 5 years |
| Model | WAN Port | LAN Port | WIFI Antenna Interface | Power Supply |
| IAP2300-2N2-5T-2LVI | 1 | 4 | 2 | 12~36VDC |